Are you facing issues with your Xiaomi Mi 11T 5G such as:
- Dead boot
- Soft brick
- Stuck on Mi logo
- Boot loop
- FRP or Mi account lock?
If so, you've landed in the right place! This guide provides the essential tools and firmware to repair your Mi 11T 5G — no need for expensive boxes like UFI or JTAG.
Using MTK Scatter Firmware and UnlockTool, you can resolve a wide range of software-related issues through a simple USB connection.
✅ What You Can Fix Using This Method:
- Dead Boot Recovery
- Boot Loop / Stuck on Logo
- FRP Lock Removal (Google Account)
- Mi Account Bypass
- Fastboot Mode Issues
- Screen Lock Removal
- IMEI Repair / Null IMEI
- Touchscreen Firmware Errors
- System Partition Corruption
🧰 Tools Required:
- Windows PC or Laptop
- Xiaomi Mi 11T 5G MTK Scatter Firmware
- Latest MTK USB Drivers
- UnlockTool or compatible full dump flasher
- Good quality USB cable
- At least 30% battery charge
📝 Step-by-Step Repair Guide:
Step 1: Download Required Files
- Xiaomi Mi 11T 5G firmware (ensure it matches your model)
- Latest MTK USB Drivers
- UnlockTool or other compatible tool
Step 2: Install MTK USB Drivers
Install MediaTek (MTK) drivers to ensure your PC detects the phone.
Step 3: Extract Firmware
Unzip the firmware and locate the MT6893.map file (specific to the Mi 11T 5G chipset).
Step 4: Launch UnlockTool
- Open UnlockTool and select MediaTek option.
🔐 Backing Up NV Data Before Flashing (Highly Recommended)
Why Back Up?
Backing up NVRAM/NVDATA is essential to avoid:
- IMEI loss
- Baseband unknown
- Wi-Fi/Bluetooth MAC issues
- SIM/network problems
🔧 How to Backup NV Data Using UnlockTool
📌 Requirements:
- UnlockTool (activated)
- MTK USB drivers installed
- Mi 11T 5G with 30%+ charge
- USB cable
🛠️ Step-by-Step:
- Open UnlockTool and log in.
- Select MediaTek.
- Go to Service or Backup tab.
- Click Backup NVRAM/NVDATA
- Boot device into BROM mode:
- Hold Vol Up + Vol Down, then plug USB.
- Or use “Force BROM” in the tool.
- Choose save location and wait for completion.
🔐 Backup file will be saved as.binor.img— keep it safe!
Step 5: Start Flashing
- Load the
MT6893.mapfile from your firmware directory. - In UnlockTool, click Flash.
Step 6: Connect Your Device in BROM Mode
- Power off the device.
- Hold Volume Up + Volume Down and connect via USB.
- Alternatively, use “Force BROM” if the phone isn’t detected.
- Wait for the process to complete.
- A success message will appear once done.
Step 7: Reboot and Test
- Disconnect the phone and power it on.
- It should boot into the OS normally with issues resolved.
Restore NV Data If Issues Occur After Flash
Why Restore?
Restoring NVRAM/NVDATA is essential to avoid:
- IMEI loss
- Baseband unknown
- Wi-Fi/Bluetooth MAC issues
- SIM/network problems
📌 Requirements:
- UnlockTool (activated)
- MTK USB drivers installed
- Mi 11T 5G with 30%+ charge
- USB cable
🛠️ Step-by-Step:
- Open UnlockTool and log in.
- Select MediaTek.
- Go to Service or Restore tab.
- Click Restore NVRAM/NVDATA
- Boot device into BROM mode:
- Hold Vol Up + Vol Down, then plug USB.
- Or use “Force BROM” in the tool.
- Choose saved file and wait for completion.
🔐 Backup file will be saved as.binor.img— keep it safe!
⚠️ Important Notes:
- Always use the correct firmware for your device variant.
- Backup your personal data + NVRAM/NVDATA before flashing.
- Avoid interrupting the flashing process.
- For FRP/Mi Account locks, make sure your tool supports Secure Boot Auth Bypass.
📦 Download Links:
- Xiaomi Mi 11T 5G Dump File is NOT Free.
For Paiement
Or
- MTK USB Drivers.
- UnlockTool Other Compatible Tool.