To perform a hard reset on the Nokia TA-1204 using the Avengers Box or Tool, follow these general steps. Please ensure that you have the correct drivers installed and that you are using the appropriate cables to connect your device to the tool. Here's the process:
Steps to Hard Reset Nokia TA-1204 using Avengers Box:
Install the Necessary Drivers:
Nokia device from Here
Avengers Box software is installed on your PC from Here.
Avengers Box software is installed on your PC from Here.
Launch the Avengers Tool:
- Open the Avengers Box software on your PC.
Connect Your Device to the PC:
- Use a USB cable to connect your Nokia TA-1204 to the PC. Ensure the device is powered off before connecting and press Volume Down.
Enter the Tool Interface:
- On the Avengers Box interface, select the option SpreadTrum Diag.
Select the Hard Reset Option:
- Look for the "EnterDiag" nd "Factory Reset" option in the software.
Confirm and Start the Process:
- Follow the on-screen instructions to proceed with the reset. Typically, you'll need to click "EnterDiag" to initiate the process and after "Factory Reset" to Hard Reset.
- Wait for the process to complete. The device should reboot automatically once the reset is finished.
Wait for Completion:
- The tool should display a success message once the hard reset is successfully completed.
- Your Nokia TA-1204 should now be reset to its factory settings.
Important Notes:
- Backup Your Data: Performing a hard reset will erase all data on the device, so it’s recommended to back up any important files before proceeding.
- Battery Level: Make sure your device has enough battery charge before starting the process to prevent interruption.
If you're encountering any errors or if the tool is not recognizing the device, make sure that the correct COM port is selected and that you have installed all necessary drivers.
Let me know if you need further assistance!